You can change the projection mode to flip the image over top-to-bottom.
- Turn on the projector and display an image.
- Hold down the A/V Mute button on the remote control for five seconds. ...
- To change projection back to the original mode, hold down the A/V Mute button for five seconds again.
or MENU method
Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select the Projection setting and press Enter.
5. Select a projection mode and press Enter.
• Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a wall or ceiling mount. This mode should also be used when you mount the projector vertically on a table to create an interactive work surface.
• Front lets you project from a table in front of the screen.
• Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or ceiling and behind a translucent screen. • Rear flips the image horizontally to project from behind a translucent screen.
6. Press Menu or Esc to exit the menus.